Sublimation Heat Press Settings
The parameters shown in the table are SUBLIMATION average reference values. For optimal results, it is recommended to conduct your own testing based on your specific materials and conditions to determine the best settings for your application.
Surface |
Press Time |
Temp |
Pressure |
Tips/Comments |
Ceramic Mugs |
150-210 seconds | 350-400° F 176-204 ℃ |
40 psi (medium) | Time varies with press. Mugs should be cooled down after transfer paper is removed in either a bucket of warm water or using a cooling plate. |
Stainless Steel Tumblers |
60 - 90 seconds | 365° F 185 ℃ |
40 psi (medium) | Time varies with press. If you are doing a full wrap, press for 60-90 sec. then rotate your tumbler 180 degrees and press a second time for 60-90 sec. |
Polyester Fabric |
35-45 seconds | 400 - 410° F 204 - 210 ℃ |
40 psi (medium) | Pre-press shirt for 3-5 seconds to eliminate moisture. Tack spray transfer and use blow-out sheet to avoid ghosting. |
Vapor Apparel |
45-55 seconds | 380°-390° F 193 - 199 ℃ |
40 psi (medium) | See vaporapparel.com for tips on reducing press lines. |
Polyester with Foam Backing (Koozie / Mousepad) |
45 seconds | 400° F 204 ℃ |
40 psi (medium) |
Look for a tight knit and high white point for more vibrant color. |
Metal/Chromaluxe (Unisub brand) |
60 seconds | 400° F 204 ℃ |
40 psi (medium) | Remove plastic coating before pressing. Use blow-out paper. |
Metal (Other Brands) |
60 seconds |
375°-400° F 190 - 204 ℃ |
40 psi (medium) | Time varies with metal manufacturer (always consult 40 psi manufacturer for correct time and temp). Place absorbent sheet on bottom of heat press. Then, place product transfer side DOWN on top of the absorbent sheet. |
Unisub Products |
60 seconds | 400° F 204 ℃ |
40 psi (medium) | Remove plastic coating. Remove transfer paper immediately after pressing. |
Glass or Ceramic Tiles |
300 - 720 seconds | 400° F 204 ℃ |
40 psi (medium) | Time varies depending on tile type and size. Always consult manufacturer. Press tiles from back (transfer side down). Press into silicon pad. |
Fire Retardant Plastics |
40-75 seconds | 350 - 400° F 177 - 204 ℃ |
40 psi (medium) | Remove plastic coating. Remove transfer paper immediately after pressing. |
Hardboard |
60 seconds | 400° F 204 ℃ |
40 psi (medium) | Remove plastic coating and press with the transfer paper on top. Remove immediately after pressing unless the surface is textured, then wait for substrate to cool and remove the transfer paper |
Glass |
180 - 240 seconds | 360 - 400° F 182 - 204 ℃ |
40 psi (medium) | Be careful not to put too much pressure on the glass. This can shatter it. Wear protective gear. Always check with the substrate manufacturer for pressure and heat settings. |
Felt |
60 seconds | 400° F 204 ℃ |
30-40 psi (light/medium) | Felt can curl as it cools. Place a heavy object on the substrate immediately after pressing and allow to cool while compressed. |
Marble |
120 seconds | 390° F 199 ℃ |
40 psi (medium) | Peel transfer paper while hot. If the marble has attachable cork or material, wait for the substrate to cool before attaching. |
Siser EasySubli |
15 - 30 seconds | 310° F 154 ℃ |
40 psi (medium) | Make sure to remove the backing before pressing. You can press with a mask if needed. Peel mask immediately after pressing. Do not wash for at least 24 hours. |
Polyester Linen |
55 - 65 seconds | 385 - 425° F 196 - 218 ℃ |
40 psi (medium) | Press with substrate facing up and transfer paper on top. Press with substrate facing up and transfer paper while hot. |
Wood |
60 seconds | 400° F 204 ℃ |
40 psi (medium) | Remove any plastic coating. Press with the transfer on top. |
Custom Heat Press Solutions
Need a custom-sized heat press machine for your specific project? WUMSTOT KILO offers customization services to meet your unique requirements.
Contact Us for Customization
📞 Phone: +1 (213) 397-1580 / +1(213)708-7008
⏰ Available for consultation 24/7
🌐 Custom size options available
💬 Professional technical support
Whether you're running a small business or managing large-scale production, we can help you find the perfect heat press solution for your needs. Our team of experts is ready to discuss your requirements and provide professional recommendations.
Contact us today to discuss your custom heat press requirements!
